operation manual

Problem Possible cause Solution
The appliance switched
off automatically after
having been on for 1
hour.
Set the on/off slide to ‘0’ and
then to ‘I’ again to switch the
appliance off and on again
The appliance is
not suitable for the
voltage to which it is
connected.
Make sure that the voltage
indicated on the appliance
corresponds to the local
mains voltage.
The mains cord of the
appliance is damaged.
If the mains cord is damaged,
you must have it replaced by
Philips, a service centre
authorised by Philips or
similarly qualied persons in
order to avoid a hazard.
The
temperature
cannot be set.
You have activated the
temperature lock.
Press and hold the
temperature decrease/lock
button for a few seconds
until the lock symbol
disappears from the display.
Smoke
escapes when
I open the
clip.
In some climates and
surroundings, the air
contains more
moisture than in
others. The heat of the
curler causes moisture
that is naturally present
in the surrounding air
to evaporate.
This is normal and harmless.
ENGLISH12