operation manual

3 Create flicks and curls
To create icks: ( )
1 Straighten a section of hair and turn the straightener half-circle
inwards (or outwards) when it reachs the end of the hair.
2 Hold the straightener in same position for 2 to 3 seconds, and then
release it.
To create curls: (
)
1 Take a section of hair (max. 5cm) and place it between the
straightening plates fairly close to the scalp.
2 Turn the straightener 180 degrees inwards until the section forms a
U-shape.
3 Slide the straightener slowly downwards in a single motion to the
end, and then turn the straightener inwards.
4 Hold the straightener in same position for 2 to 3 seconds, and then
release it.
5 After 20 seconds, repeat steps 1-4 until you achieve the desired look.
Tip: It is normal if the appliance produces some smoke when you use
it for curling.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates (
).
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
).
4 Guarantee and service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.