Register your product and get support at www.philips.
a bc h i g j f e d
English Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 1 Important Read this user manual carefully before you use the appliance and keep it for future reference. • WARNING: Do not use this appliance near water. • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a risk, even when the appliance is switched off.
• • • • • If you use the appliance on color-treated hair, the straightening plates may stain. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Hair Type Temperature Setting Coarse, curly, hard-to-straighten Mid to High (170 ºC and above) Fine, medium-textured or softly waved Low to Mid (160 ºC and below) Pale, blonde, bleached or color-treated Low (Below 160 ºC) 1 Connect the plug to a power supply socket. button ( ) until the display screen lights up. 2 Press and hold the »» The default temperature setting is displayed ( ). button ( ) to select a suitable temperature 3 Press the setting for your hair.
3 Create flicks and curls 4 Guarantee and service To create flicks: ( ) 1 Straighten a section of hair and turn the straightener half-circle inwards (or outwards) when it reachs the end of the hair. 2 Hold the straightener in same position for 2 to 3 seconds, and then release it. To create curls: ( ) 1 Take a section of hair (max. 5cm) and place it between the straightening plates fairly close to the scalp. 2 Turn the straightener 180 degrees inwards until the section forms a U-shape.
© Royal Philips Electronics N.V. 2009 All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
