operation manual
ENGLISH
Introduction
The new Philips SalonStraight Seduce provides ultra-fast
and super-smooth straightening results. The EHD (Even
Heat Distribution) Technology ` provides optimal heat
distribution for long-lasting, more effective, professional
results. The adjustable temperature enables you to
personalise the straightener to obtain optimal results for
your hair. The ceramic-coated plates provide frictionless
gliding and maximum contact with the hair for long-lasting
straight results. The rounded plate design also makes it
possible to create the latest curly styles and fashionable
icks.
General description (Fig. 1)
A Ready indication
B Display
C Selected temperature setting
D Usage time
E + button to increase the temperature setting
F - button to decrease the temperature setting
G On/of button
H Hanging loop
I Closing lock
J Swivel cord
K Ceramic-coated plates
L Cool-touch area
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
Keep the appliance away from water. Do not use it
near or over water contained in baths, washbasins,
sinks etc. When you use the appliance in a bathroom,
unplug it after use. The proximity of water presents a
risk, even when the appliance is switched off.
Warning
Check if the voltage indicated on the appliance
corresponds to the local mains voltage before you
connect the appliance.
Check the condition of the mains cord regularly. Do
not use the appliance if the plug, the mains cord or
the appliance itself is damaged.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid
a hazard.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Keep the appliance away from non-heat-resistant
surfaces and never cover the appliance with anything
(e.g. a towel or clothing) when it is hot.
Keep the appliance away from ammable items.
Never leave the appliance unattended when it is
plugged in.
Always return the appliance to a service centre
authorised by Philips for examination or repair. Repair
by unqualied people could cause an extremely
hazardous situation for the user.
Caution
For additional protection, we advise you to install a
residual current device (RCD) in the electrical circuit
that supplies the bathroom. This RCD must have a
rated residual operating current not higher than
30mA. Ask your installer for advice.
The straightening plates and the plastic parts near
the plates reach a high temperature quickly. Prevent
the hot surfaces of the appliance from coming into
contact with your skin.
Do not use the appliance on articial hair.
Only use the appliance on dry or damp hair.
Do not leave the plates in your hair for more than a
few seconds at a time as this may cause damage to
your hair.
For safety reasons, the straightener automatically
switches off after having been on for 1 hour.
Always unplug the appliance after use.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Do not wind the mains cord round the appliance.
Wait until the appliance has cooled down before you
store it.
Keep the straightening plates clean and free of
dust, dirt, styling spray and gel. Dust, dirt and styling
products may cause damage to the ceramic-coated
straightening plates.
The plates have a ceramic coating. This coating
slowly wears away over time. This does not affect the
performance of the appliance.
This appliance is only intended for straightening
human hair. Do not use it for any other purpose.
If you use the appliance on colour-treated hair,
the straightening plates may stain.
The maximum temperature occurs just after heating
up. The actual temperature during use may be lower.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards
regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user
manual, the appliance is safe to use based on scientic
evidence available today.
Using the appliance
Straightening your hair
Straighteners are powerful styling tools and must always
be used with care.
As with all straighteners that reach salon-high
temperatures, do not use the appliance frequently to
avoid damage to the hair. If you use the straightener
incorrectly, you could overheat your hair or even burn
it. Always make sure you select a temperature that is
suitable for your hair type.
1 Put the plug in the wall socket.
2 Press the on/off button.
Slide the closing lock down to unlock the appliance
if it is locked.
The default temperature setting of 120 appears on
the display. As soon as the appliance has heated up
to this setting, the word ‘READY’ appears on the
display (Fig. 2).
Never leave the appliance unattended when it is plugged
in. Never put the appliance on a surface that is not heat-
resistant when it is heating up and when it is hot.
Tip: If you lock the plates with the closing lock, the
straightener heats up more quickly.
3 Select a temperature setting that is suitable for
your hair type (Fig. 3).
Always select a low temperature setting when
you use the straightener for the rst time.
For coarse, curly or hard-to-straighten hair, select a
medium to high setting (170 and up).
For ne, medium-textured or softly waved hair, select
a medium to low setting (160 and down).
Take extra care with pale, blonde, bleached or colour-
treated hair, since it is susceptible to damage at high
temperatures.
4 To set the temperature, press the + button to
increase the temperature setting or press the -
button to decrease the temperature setting (Fig. 4).
The display shows the selected temperature setting.
When the appliance has heated up to the selected
setting, the word ‘READY’ appears on the display.
The bars on the display show the remaining
usage time of the appliance. The total usage time
is 60 minutes. Every ten minutes one of the six
bars disappears. After 60 minutes, the appliance
switches off automatically.
5 Comb or brush your hair so that it is disentangled
and smooth. (Fig. 5)
6 Use a comb to divide the hair into sections. Do not
put too much hair in one section.
Tip: It is better to section off the crown area and to
straighten the hair underneath rst, followed by the top area.
7 Take a section that is not wider than 5cm. Place
it between the straightening plates and press the
handles of the appliance together.
8 Slide the straightener down the length of the hair,
from root to hair end, without stopping to prevent
overheating (Fig. 6).
-
-
-
-
-
-
-
-
,
-
-
-
,
,
,
9 Repeat this process after 20 seconds until you have
achieved the desired look.
10 Let your hair cool down. Do not comb or brush it
before it has cooled down, as this would ruin the
hairstyle you have just created.
Cleaning
1 Make sure the appliance is switched off and
unplugged.
2 Let the appliance cool down completely on a heat-
resistant surface.
3 Clean the appliance with a damp cloth.
Storage
Never wind the mains cord round the appliance.
1 Make sure the appliance is switched off and
unplugged.
2 Let the appliance cool down on a heat-resistant
surface before you store it.
3 Lock the straightening plates together with the
closing lock before you store the appliance.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
at an ofcial collection point for recycling. By doing
this, you help to preserve the environment (Fig. 7).
Guarantee & service
If you need information or if you have a problem, please
visit the Philips website at www.philips.com or contact
the Philips Customer Care Centre in your country
(you nd its phone number in the worldwide guarantee
leaet). If there is no Customer Care Centre in your
country, go to your local Philips dealer or contact the
Service Department of Philips Domestic Appliances and
Personal Care BV.
Troubleshooting
If problems arise with your straightener and you cannot
solve them with the information below, please contact
the nearest Philips service centre or the Philips Customer
Care Centre in your country.
Problem Solution
The appliance
does not work
at all.
Perhaps there is a power failure
or the socket is not live. Check if
the power supply works. If it does,
plug in another appliance to check
whether the socket is live.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by Philips
or similarly qualied persons in
order to avoid a hazard.
-
4222.002.7014.2
2/7