Register your product and get support at www.philips.
English Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 1 Important Read this user manual carefully before you use the appliance and keep it for future reference. • WARNING: Do not use this appliance near water. • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a risk, even when the appliance is switched off.
• • • • • If you use the appliance on color-treated hair, the straightening plates may stain. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Hair Type Temperature Setting Coarse, curly, hard-to-straighten Mid to High (170 ºC and above) Fine, medium-textured or softly waved Low to Mid (160 ºC and below) Pale, blonde, bleached or colortreated Low (Below 160 ºC) 1 Connect the plug to a power supply socket. 2 Slide the closing lock ( ) to unlock the straightening plates. button ( ) until the display screen lights up. 3 Press and hold the »» The default temperature setting is displayed ( ).
8 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. 9 After 20 seconds, repeat step 8 until you achieve the desired look. 10 To straighten the rest of your hair, repeat steps 6 to 9. After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Clean the appliance and straightening plates by damp cloth. 4 Lock the straightening plates ( ).
© Royal Philips Electronics N.V. 2009 All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
