Software Upgrade

Step 2: Upgrade the firmware for your player
You can upgrade the firmware via USB or online.
For upgrade via USB:
1. Download firmware
Click on the Download icon at the top of the screen to download the new firmware package to your
computer.
2. Transfer firmware to a USB flash drive
i. Extract the firmware upgrade file from the downloaded firmware package.
Note: DO NOT rename either the folder name or the file name in the folder to avoid an upgrade
corruption.
ii. Copy the file to the root directory of the USB flash drive.
3. Upgrade the firmware to the player
i. Switch on the player.
ii. Make sure there is NO USB flash device inserted on the player; and NO SD card inserted in the slots.
iii. Insert the USB flash drive containing the firmware file into the USB slot.
iv. On the remote control, press button.
v. Select [Setup] > [MISC] > [USB upgrade] on the on-screen menu.
vi. Press <OK>.
vii. The player will search for the upgrade files in your USB flash drive. Once the files have been
recognized, you will be prompted to start an upgrade.
viii. To proceed with the upgrade, press <OK> on the remote control.
Warning: DO NOT remove the USB flash device during the firmware upgrade procedure. If an
error occurs during the upgrade, retry the procedure.
Warning: DO NOT press any button or interrupt the main supply during the upgrading process,
otherwise the product may become defective.
ix. After a short while (approximately 2 minutes), a message “Install completed!” would be shown.
x. Upon the completion of the upgrade, the player would be switched off and then on automatically.