Always there to help you Register your product and get support at www.philips.
Contents 1 Trademark notice 3 2 Basics 4 Connect 4 Switch on or off 4 Auto standby 5 Screen saver 5 Navigate on the Home screen 5 Use the remote control 6 Enter text 7 3 First-time setup 9 Connect to the Internet through Wi-Fi 9 One-touch Wi-Fi Protected Setup (WPS) 10 Standard 11 4 Play 12 Play from online services 12 Play from a USB mass storage device 13 13 Select play options 14 EN 1
15 5 Setup 17 System 17 Audio 17 Video 18 Network 18 6 EasyLink 19 20 20 8 Troubleshooting 2 20 EN 22
1 Trademark notice ! or registered trademarks of HDMI licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
2 Basics Connect HDMI HDMI IN b a a # $ %& ' %&* + b # Connects to power supply through the AC/DC adapter 1 On , press on the remote control to switch on. » % : 2 ; %& : # ; = %& + input channel of .
HDMI SOURCE TV 3 % to standby mode, press » % : again on the remote control. Auto standby From the Home screen, switch on [Automatic Standby]in[Setup] > [System]. If there is no button press or media play on for 15 minutes, switches to standby mode automatically except when: # You enter text on the onscreen keyboard. From the Home screen, go to[Setup] > [System] to switch on ! " #$.
1 On the remote control, press to go to the Home screen. » ; = @ : Online services : Connected storage devices, such as a USB storage device : Setup menu 2 Select a menu: a #' . » Current menu is highlighted. b ( "' or to select a menu. » Options in the menu are displayed. 3 Select an option in the menu: a Press . » Current option is highlighted. b Press or and OK.
# Start, pause, or resume the play # Stop the play / # ! G ? # + ! # Press repeatedly to select a search speed / # Rotate a photo # = + = :+ +7, # Access subtitle options ; : "# # Press and hold and select the option & " " & # Press , + Enter text With the onscreen keyboard, use the remote con
Enter text 1 On the remote control, press select the letter or symbol. 2 On the onscreen keyboard, select the input options by using the remote control: / : Move the cursor to the left or right. : Delete the entry before the cursor. 3 When the text entry is complete, select OK on the onscreen keyboard to exit.
3 First-time setup % = , do the following setup: # In ! 7 & & $, select the menu language on ; # In [Wireless], connect to your home network through Wi-Fi. + < ' # On the remote control, press . » You enter the Home screen. + & # ' # From the Home screen, go to [Setup]. = & > @0 Connect to a wireless router (Access Point).
» Next time you switch on , connects to the previously connected network automatically. Note # Q$ + = Q$ to the list : % Q$ the Home screen. > [Wireless (WiFi)]> !% X $ from Tip # = + + ' * manually enter the SSID and password of the network.
# 2 Consult the user manual of the router to learn how to add a WPS device to the router. For example: press and hold the WPS push button. » % . On , select PBC. » On , a message is displayed when the connection is complete. PIN 1 2 Write down the PIN that is displayed on . 3 On , select %. On your PC, enter the PIN on the router setup page: # Consult the user manual of the router to learn how to enter the PIN of the router.
4 Play ; %& Z = = # the online services, or # a USB mass storage device. " # " Connect : K Z = %&: Note # [ ! Z! \ ] ^:&: + + = += ^ %& providers. TM HDMI Accu Weather .com Web Albums WWW 1 On the Home screen, select an online service (see 'Navigate on the Home screen' on page 5): a ( ' " ' ' .
# # % + ! (unavailable in some online services). % = . " # : & % %& = connect to . = 86% HDMI 86% Folder 1 Movies Music Photos On the Home screen, select the USB source.
+ " )# # ' # Select !Z"" $' ! $' [Photos]' or ! $. In ! $, ! $, and [Photos]: + " )# X # ' # Select[Search]. Enter the keyword on the onscreen keyboard. + " # ' # Select [Sort Order]. + & " ' # Select [Go to Folder]. Select play options 1 2 During play, press ( + (% on the remote control. 14 EN Press to select an option.
& " On , select USB on the Home screen. Go to [Folder], and you can : 1 In [Folder] G : % a ( "' , +j » A list of options is displayed. b " ! " " " $j » Q = c Press 2 3 4 : " " " j j On the remote control, press , +.
1 In [Folder] : a ( "' , +j » A list of options is displayed. 2 3 4 b " ! " " " $j » Q = : c Press " " j j On the remote control, press , +. On the pop-up list of options, select ! " #" $. Name the playlist as needed. » A music playlist is created.
5 Setup You can change the setup options of . 1 On the Home screen, select [Setup]. # If necessary, press on the remote control to go to the Home screen. » % = : 2 Press # Press to select an option. Press OK : to return to the upper-level menu. System ! 7 & & $: Select the language for onscreen menus. [Subtitle]: Select the subtitle language for videos.
Video [Aspect Ratio]: Select display aspect ratio. [TV System]@ = %& : = %& manual for details. *!v z { |$: Use 1080p 24 Hz for video output, where 1080p 24 Hz denotes the resolution and frame rate.
6 EasyLink supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. 1 % %& protocol. 2 ; %& $]$ '$ %&*: 3 On , switch on [Easy Link]. # On the Home screen, select [Setup] > [Easy Link]. Select [On].
Switch on [Auto Upgrade Reminder]in [Setup] > ! & $. You can + = to the Internet. = ! . + X ' # On the Home screen, go to [Setup]> ! & $ > !* $. & 1 2 Connect to the Internet. 3 Follow onscreen instructions to complete the update.
2 On , do the following: a = : & j b ( ' " ! $ ~ ! & $~ ! : upgrade]. » = update. 3 Follow onscreen instructions to complete the update. » When the update is complete, switches off automatically, and then switches on again. Caution # Keep + complete.
8 Troubleshooting If you contact Philips, you will be asked for the model and serial number of this = : % + + + = : Write the numbers here: Model No. __________________________ Serial No. ___________________________ No picture.
Note # +Z : # Philips ASUC 12A-050150(/37, /55), Philips ASUC 12E-050150(/12) # Input: 100-240 V~ 50/60 Hz, 0.3 A # Output: DC 5.0 V, 1500 mA < 7.
24 EN
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. HMP2000_12_UM_V1.1 wk1236.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual, or in the supplied safety leaflet (if available). 1. Wget, Parted, Gdb GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.
