Operation Manual

– 47 –
Errors Possible cause Remedy
Problems when establishing a connection
You can neither make a
telephone call nor send a fax
message.
Wrong dialling mode is set.
You are operating in a PABX-
environment (private branch exchange)
but the setting is incorrect.
Change dialling mode with function 14
(see 2.2).
Change in function 14 PABX NO to
PABX YES (see 2.5).
Error report
The telephone connection was of poor
quality.
The recipient has a paper jam or has
run out of paper.
Try again or send the fax at reduced
speed (function 21).
Call your fax correspondent.
or
Your fax correspondents line is busy,
does not answer or a different device
answers.
Try later or call your fax correspondent
by phone to check.
Your fax machine is not properly
installed or not properly plugged in.
Check the installation of your fax
machine.
You are connected to a PABX system. Check the settings in function 14.
TRANSM. ERROR
E
RRO
R
REDIAL FAILED
NO LOOP CURRENT
NO DIALTONE
NO CONNECTION
FINE PHOTO BUSY TEL TEL/FAX
EXT.
FINE PHOTO BUSY TEL TEL/FAX
EXT.
FINE PHOTO BUSY TEL TEL/FAX
EXT.
FINE PHOTO BUSY TEL TEL/FAX
EXT.
FINE PHOTO BUSY TEL TEL/FAX
EXT.