Operation Manual

– 43 –
Press the CURSOR LEFT or CURSOR RIGHT key.
DELETE PIN? YES
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Confirm with OK.
2 COMMUNICATION
FINE PHOTO BUSY TEL TEL/FAX
EXT.
5.4.5 Using Cost Centre Codes
When you apply for access to the MCL service, you have the option to use a cost centre code. This code must
be entered after pressing the Mercury key and before the long distance or international telephone number is
entered. It identifies the department or person making the phone call.
5.4.6 Initiating a conversation via MCL service
To initiate a telephone conversation via the MCL service, just enter the Mercury key before you enter the
telephone number. When you press the Mercury key, an “M” is displayed and you can enter the desired
telephone number.
REDIAL
Press the Mercury key.
M
FINE PHOTO BUSY TEL TEL/FAX
EXT.
1
4
7
2
5
8
0
3
6
9
#
∗
Now enter the desired telephone number.
M12345
FINE PHOTO BUSY TEL TEL/FAX
EXT.
Lift the handset.
By pressing the Mercury/Redial key several times within 3 seconds you can toggle between the
mercury and the redial function.
Operation on an extension of a PABX
If you operate your fax machine on an extension of a PABX and you want to make a dialling pause between the
outside line access code and the desired telephone number, do the following:
1
4
7
2
5
8
0
3
6
9
#
∗
Enter the outside line access code.
REDIAL
Press the MERCURY/REDIAL key twice within 3 seconds. This
will insert a dialling pause. To confirm the pause, you have to wait
at least 3 seconds. Now you can enter the desired telephone number
with the Mercury “M” in front as usual.