Operation Manual

– 29 –
If the machine calling you has no sender idendification stored, the
display will read:
RECEIVING ...
FINE PHOTO BUSY TEL TEL/FAX
EXT.
The fax machine will now print out the message. The confirmation
signal will sound at the end of the transmission.
After transmission tear off the paper protruding from the machine,
by tearing it along the paper tear strip, starting at one side of the
paper.
With additional telephones
If you answer the call on an additional telephone and recognise a fax
signal, you can start the fax reception by pressing
∗
and
5
. This
code, the so-called DTMF code, can be changed (function 33).
However this will work only if your additional telephone has tone dialling. On many pulse dialling
telephones you can precede the code with a
∗
or a
#
to transmit signals in tone dialling mode.
Please see your telephone instructions for further information.
3.4.3 Automatic reception
If your fax machine is set to automatic reception, it will answer any call immediately. A caller then
has to pay for the call even though you decide not to answer it. To prevent this you can change to
TEL mode.
Without ringing, no additional devices possible
FUNCTION
1
4
7
2
5
8
0
3
6
9
#
∗
Change to TEL/FAX mode with function 31. The corresponding
pointer on the display will light up.
15-MAY-97 12:30
FINE PHOTO BUSY TEL TEL/FAX
EXT.
Your fax machine detects incoming faxes and receives them
automatically. If a fax message is received, you will not hear the
telephone ringing.
If the incoming call is a telephone call, you will hear the telephone
ring. If you lift the handset, you can talk as usual. If you do not lift
the handset, after a number of rings which you can select yourself,
the caller will be connected to the fax machine, and has the
opportunity to send you a fax message.