Operation Manual

– 27 –
If the recipient machine has no sender identification stored, the
display will show:
SENDING ...
FINE PHOTO BUSY TEL TEL/FAX
EXT.
After a few seconds the display will read alternately:
PRESS START
FINE PHOTO BUSY TEL TEL/FAX
EXT.
NEXT PAGE
FINE PHOTO BUSY TEL TEL/FAX
EXT.
START
COPY
If you wish to send more pages, press the START key while the
first page is going through. As soon as it is through, you have 5
seconds to insert the next page. For every new page you want to
send, press the START key whilst the previous page is going
through. When the last page has gone through, the display will
indicate the number of pages transmitted.
02 PAGES SENT
FINE PHOTO BUSY TEL TEL/FAX
EXT.
A transmission report will be printed out at the end of each transmission (see example below) and
the machine will return to stand-by.
If the transmission is not successful an error report will be printed out (see example below). During
the printing of an error report the ERROR lamp flashes. Press STOP.
Examples for transmission report and error report:
Do not insert a new document until the report is completely printed out. Otherwise the document
is drawn in with the report being printed.