Operation Manual

– 13 –
Tone or pulse dialling
Your phone can dial in two different ways. Older telephone systems usually work with pulse dialling, whilst
modern, digital systems use tone dialling. You can change the dialling mode of your fax machine. If you do not
know which method your line uses, contact your telephone company.
Only for UK: Although this equipment can use either loop disconnect or DTMF signalling, only the
performance of the DTMF signalling is subject to regulatory requirements for correct operation. It
is therefore strongly recommended that the equipment is set to use DTMF signalling for access to
public or private emergency services. DTMF signalling also provides faster call set up.
FUNCTION
1
4
7
2
5
8
0
3
6
9
#
∗
Select function 14 (pressing the function key and then
the number 14).
14 DIAL MODE
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
DIAL MODE: TONE
FINE PHOTO BUSY TEL TEL/FAX
EXT.
Press the CURSOR LEFT or CURSOR RIGHT key.
DIAL MODE: PULSE
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
PABX? NO
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key again if you are operating your fax machine on
a regular PTT line (connecting to a private branch exchange see
chapter 2.5).
1 SET UP
FINE PHOTO BUSY TEL TEL/FAX
EXT.
Sometimes it is necessary to send tone dial signals to make use of certain services. If your
telephone system works on pulse dialling, you can still do so by pressing the
∗
or
#
key. All
numbers are then transmitted in the tone dialling method. As soon as you replace the handset on
the fax machine, your fax machine will switch back to pulse dialling.