Operation Manual

– 12 –
Connecting to the power supply
Plug the mains cable into the wall socket. The machine will carry out an internal test.
Afterwards you need to enter the current date and time (see below).
TIME: 0:00
FINE PHOTO BUSY TEL TEL/FAX
EXT.
If there is no thermal paper in the machine, the display will read:
Insert a new paper roll (see chapter 2.6).
OUT OF PAPER
FINE PHOTO BUSY TEL TEL/FAX
EXT.
If you do not enter the time and date, after 40 seconds or after you
press the STOP key the display will read as follows:
DIAL/INSERT DOC.
FINE PHOTO BUSY TEL TEL/FAX
EXT.
1
4
7
2
5
8
0
3
6
9
#
Use the dial pad to enter the correct time
(e.g.
1
2
3
0
for 12:30).
TIME: 12:3¡
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
YEAR: ¢6
FINE PHOTO BUSY TEL TEL/FAX
EXT.
1
4
7
2
5
8
0
3
6
9
#
Enter the correct year.
YEAR: 9
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
MONTH: ¡1
FINE PHOTO BUSY TEL TEL/FAX
EXT.
1
4
7
2
5
8
0
3
6
9
#
Enter the correct month.
MONTH: 0¤
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
DAY: ¡1
FINE PHOTO BUSY TEL TEL/FAX
EXT.
1
4
7
2
5
8
0
3
6
9
#
Enter the correct day.
DAY: 1¤
FINE PHOTO BUSY TEL TEL/FAX
EXT.
OK
Press the OK key.
15-MAY-97 12:30
FINE PHOTO BUSY TEL TEL/FAX
EXT.
You can correct your entries any time you want (see chapter 2.7.6).
If desired you can change the language on the display with function 15 (see page 19).
In the event of a power failure, you can no longer operate the telephone of fax facility. If
switched on again you have to re-enter the current time.
Keep the power plug free and easily accessible. The machine has no power on/off switch, so
the plug is used to switch off the power.