User manual

Note: The massagers may produce a smell the rst few
times you charge them. This is normal.
, When the massagers are fully charged, the
charging light goes out.
Using the appliance
Note: The massager shown in the gures is the female
massager. The male massager has the same buttons
and functionalities.
Thoroughly clean the massagers before rst use,
after every use and when you use them on another
body area, to reduce the risk of infection (see
chapter ‘Cleaning’).
1 Press any button to switch on the massager.
Note: If the massager has not been used for more
than 7 days, you can only switch it on by pressing the
+ button.
, The light ring goes on.
, The massager starts operating in the default
mode (mode 1) and at the default vibration
speed.
Tip: You can adjust the speed and select a mode
once you have familiarised yourself with the options
available.
2 Press the mode selection button to adjust the
vibration to your own preference.
The massager has 4 vibration modes:
1 Continous – continuous vibration
2 Wave – a pattern of pulses that rises and falls in
intensity
3 Heart beat – a gentle, relaxing pulse
4 Thrill – an exciting and intense pulse
ENGLISH 11