User manual

The actual operating time may vary over time,
depending on the selected vibration mode and
speed.
Charge the massagers when the light ring
starts ashing slowly to indicate that the battery is
almost empty.
1 Make sure that all parts (massagers and
charging case) are dry.
2 Insert the small plug into the charging case and
put the adapter in the wall socket.
3 Open the lid of the charging case.
4 Place the massagers in the charging case.
- The female massager only ts properly in the
charging case with the buttons facing up.
- The male massager only ts properly in the
charging case with the buttons facing down.
The massagers switch off automatically when you
place them in the charging case and close the lid.
Note: The charging case does not work when the
massagers are placed incorrectly or when the lid is
open.
Note: You can also charge one massager at a time.
5 Close the lid of the charging case.
Note: The charging case does not work if the lid is open.
, The charging light on the charging case
starts ashing to indicate that the massagers are
being charged.
Note: When you charge the massagers for the rst
time or after a long period of disuse, it may take a few
minutes before the charging light starts ashing. This is
normal.
ENGLISH10