User manual

1 Switch off the massagers and unplug the
charging case.
2 Clean the massagers with a moist cloth soaked
in lukewarm water with mild anti-bacterial
soap and rinse them under the tap. Dry the
massagers thoroughly after cleaning them.
Tip: Use a non-alcohol based disinfectant to reduce the
risk of infections.
Do not immerse the massagers in water for more
than one hour.
3 Clean the charging case with a moist cloth and
dry it properly.
This appliance has no user-serviceable parts.
Storage
If the massagers will not be used for an extended
period of time, remove cord from outlet, place
massagers in the charging case and store in a safe,
dry location where it will not be crushed, banged
or subject to damage.
Do not wrap the cord around the massagers or
charging case when storing.
1 Switch off the massagers and unplug the
charging case from the outlet.
2 Make sure massagers are clean before storing.
(See chapter ‘Cleaning’).
3 Put the massagers in the charging case in a safe,
dry place.
The female massager only ts properly in the
charging case with the buttons facing up.
The male massager only ts properly in the
charging case with the buttons facing down.
-
-
-
-
ENGLISH 15