User manual

It takes about 4 hours to fully charge the massagers.
A full charge gives you and your partner up to
5 hours to explore each other.
The actual operating time may vary over time,
depending on the selected vibration mode and
speed.
Charge the massagers when the light ring
starts ashing slowly to indicate that the battery is
almost empty.
1 Make sure that all parts (massagers and
charging case) are dry.
2 Insert the small plug into the charging case and
put the adaptor in the wall socket.
3 Open the lid of the charging case.
4 Place the massagers in the charging case.
The female massager only ts properly in the
charging case with the buttons facing up.
The male massager only ts properly in the
charging case with the buttons facing down.
The massagers switch off automatically when you
place them in the charging case and close the lid.
Note: The charging case does not work when the
massagers are placed incorrectly or when the lid is
open.
Note: You can also charge one massager at a time.
5 Close the lid of the charging case.
Note: The charging case does not work if the lid is open.
The charging light on the charging case
startsashingtoindicatethatthemassagersare
being charged.
Note: When you charge the massagers for the rst
time or after a long period of non-use, it may take a
-
-
,
ENGLISH 11