User manual
- This appliance is only intended for household use, including similar use for instance in hotels.
- This appliance allows you to choose the light intensity level you want to wake up to (see section
‘Using the lamp’, chapter ‘Using the appliance’).
- If you often wake up too early or with a headache, reduce the light level.
- If you share a bedroom with someone else, this person may unintentionally wake up from the
light of the appliance, even though this person is further removed from the appliance. This
phenomenon is the result of differences in light sensitivity between people.
This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
1 Put the plug in the wall socket.
, The hour indication on the display starts ashing to indicate that you have to set the clock
time (Fig. 6).
2 Press the menu + or - button to set the hour.
Note: You can only do this when you are in the set clock menu and when the hour indication ashes. If
this is not the case, press the MENU button, use the menu + or - button to select the set clock menu
and press the SELECT button to conrm. You are now in the set clock menu.
3 Press the SELECT button to conrm.
, The minute indication starts ashing (Fig. 7).
4 Press the menu + or - button to set the minutes.
5 Press the SELECT button to conrm.
, The appliance leaves the menu and the display shows the set clock time.
The appliance is now ready for use.
Note: Every time you remove the plug from the wall socket for more than approximately 15 minutes, you
have to set the clock time again in the way described above. To change the set clock time when the plug
is still in the wall socket, see section ‘Menu functions’ in chapter ‘Using the appliance’.
Below you nd a description of all functions that can be set in the menu. These functions appear in
the menu in the following order:
- Clock time
- Alarm time
- Alarm sound (HF3470 only)
- Display brightness: You can choose a display brightness between 1 and 4.
You can set the menu functions in the following way:
1 Press the MENU button to enter the menu (Fig. 8).
2 Press the menu + or - button to select a function. (Fig. 9)
3 Press the SELECT button to enter this function (Fig. 10).
EnglisH8