User Manual
Philips Consumer Lifestyle
Firmware Upgrade
We have developed a firmware upgrade to improve your product.
This upgrade is applicable for the following models:
HDR3700/05
Note: Before you proceed to upgrade, please be reminded that you need to do configuration again
each time after firmware upgrade!
Upgrade Procedure
Check your current version
First check your current firmware version to see if you need to upgrade:
1. The recorder is in On state. Eject the disc tray and ensure there is no disc
present . Close the disc tray.
Then proceed to press <Skip>, <1>, <2>, <3> on the remote control
Note: In case the firmware version does not appear on the screen, eject and
close the disc tray to reset, and repeat step 2.
2. The software version will be displayed on the TV screen as shown in the example below.
3. Compare your recorder firmware BE, FE and DVB-T version shown on screen with this version,
DVB-T Version: U.78
FE Version: R50_015_000
BE Version: HD5P24683Z2B
4. If your existing firmware BE, FE and DVB-T version is lower than the above versions (highlighted in BLUE),
please proceed to Step 2 (Download Firmware Upgrade) below.
Otherwise, you do not need to upgrade.
Note: Press the <BACK> button to exit the version information screen.
Pressing the <OK> button will RESET the DVD Recorder to its factory settings.
Step 1
HDR3700 Firmware Upgrade




