User Manual

Software version

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

HDR3500/31

HDR3500/58

This firmware version improves: Click here for more details.

Upgrade Procedure

Check your current firmware version

First, check your current firmware version to see if you need an upgrade:

1. Press <SYSTEM SETUP> to bring up the SETUP menu, then press <8><1><0><5> on the Remote

Control.

2. The software version will be displayed on the TV screen as shown in the example below.

VER:

3500_EU_01_06/68.09.26.00

1042008

BL:

V0808(0328)

MODULE:

HDD_PVR (+-)

SV:

/31

3. Compare the version shown on the TV screen with this firmware upgrade version, “01_09”.

If the current software is lower than 01_09, proceed to Step 2.

Otherwise, no upgrade is necessary.

Download firmware upgrade

Click the link to save the firmware on your computer.

Burning the firmware on to a CD-R / CD-RW

1. Extract the files by unzipping the zipped file (HDR3500_EU_R01_09_BIN.zip) with WINZIP or other

applications capable of handling zipped files (do not rename the extracted files).

2. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc,

using the following settings:

- File System: ISO 9660 + Joliet

- File name length : max11 chars = 8+3 (Level 1)

- Mode : 2/XA

- Character set : ISO 9660 (ISO normal CD-ROM)

- No Multi Session

Step 1

Step 2

Step 3

HDR3500 Firmware Upgrade

PAGE 1
HDR3500 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: HDR3500/31 HDR3500/58 This firmware version improves: Click here for more details. Upgrade Procedure Step 1 Check your current firmware version First, check your current firmware version to see if you need an upgrade: 1. 2. Press to bring up the SETUP menu, then press <8><1><0><5> on the Remote Control.
PAGE 2
3. - Write Speed : Low - Recording Method: Track At Once Note: The extracted files should not be placed in a folder on the disc but just in the top level directory (root). Finalize the disc. (The application may do this automatically.) Step 4 Upgrading the firmware of your HDD/DVD recorder (CD-R/CD-RW) 1. 2. 3. 4. Power up the recorder and open the DVD tray. Insert the prepared firmware upgrade CD-R/CD-RW. Close the tray and the HDD/DVD recorder will auto-read the disc.