User manual

16 Philips · Screeneo U3
5V 0.5A
5V-1A
5V·2A
5V 1A
2 Press to access and select
AV-In.
Connect to devices through
S/PDIF
Connect a digital device (e.g. a home cinema
system or sound bar) to the projector through
S/PDIF connection. With this connection, audio
is streamed to the connected digital device.
1 Using an S/PDIF optical cable, connect the
S/PDIF connector on the projector to the
S/PDIF input on the digital device.
• S/PDIF input on the digital device might
be labeled OPTICAL or OPTICAL IN.
5V 0.5 A
5V-1A
5V·2A
5V 1A
Connect to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the device.
Do not use the device over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Connect a 3.5 mm audio cable to the
following:
• to the or connector on
the projector and
• to the analogue audio input (3.5 mm
jack, or red and white jacks) on the
external speakers.
• Or connect the or connector
on the projector to headphones.
5V
5V
5V 0.5A
5V-1A
5V·2A
5V 1A
2 When connecting to the headphones, use
the volume control on the remote control to
adjust the volume to a comfortable level.