User manual

Connect to playback devices 15
Connect to a computer
through VGA
Connect a computer (e.g. a desktop or laptop)
to the projector. With this connection, images
are shown on the projection screen.
Notice
Many laptops do not activate the
external video output automatically
when you connect a second display such
as a projector. Check your laptop user
manual to find out how to activate the
external video output.
1 Using a VGA cable, connect the VGA
connector on the projector to the VGA
output on a computer.
VGA
5V 0.5A
5V-1A
5V·2A
5V 1A
2 On your computer, adjust the screen
resolution of the computer to the correct
setting and switch the VGA signal to an
external monitor. The following resolutions
are supported:
Resolution Image refresh
rate
VGA 640 x 480 60 Hz
SVGA 800 x 600 60 Hz
XGA 1024 x 768 60 Hz
WXGA 1280 x 768 60 Hz
HD 1280 x 720 60 Hz
FULL HD 1920 x 1080 60 Hz
3 Press to access and select
VGA. Images are shown on the projection
screen.
Notice
Screen Resolution
The projector supports the following
resolutions: VGA/SVGA/WXGA, HD and
FULL HD. For best results, please check
the best resolution.
To output audio through VGA connection
• Establish the VGA connection. Then using a
3.5 mm audio cable, connect the AUDIO IN
connector (3.5 mm) on the projector to the
analogue audio output (3.5 mm jack, or red
and white jacks) on the computer.
5V 0.5A
5V-1A
5V·2A
5V 1A
Notice
AUDIO IN connection only works through
VGA connection.
Connecting to devices
through AV
Connect a playback device (e.g. a DVD player,
gaming console, camcorder or digital camera)
to the projector through AV connection.
With this connection, images are shown on the
projection screen, and audio is played on the
projector.
1 Connect a RCA cable (A/V cable) to the
following:
• to the connectors (yellow for
composite video, red and white for
analogue audio) on the projector and
• to the analogue audio output jacks
(red and white) and/or composite video
output jack on a playback device.