User manual

Initial operation 11
2 To adjust image focus, press / on
the remote control or projector.
3 Then select Next to proceed to the next
step.
Step 6: Wi-Fi network setup
Set up the Wi-Fi network to access online
applications.
What you need
• A wireless network router.
• For best wireless performance and
coverage, use an 802.11n router (“Wi-Fi 4”).
1 When the network setup interface appears
as step 6, select and access Network
Configuration.
2 Select Wi-Fi to access the Wi-Fi network
list, then select your network name from
the list.
3 The network password input bar and
the virtual keyboard pop up. Input the
password for the network.
• To input your password, you may also
use on-screen pointer (see Step 4:
activate on-screen pointer, page 10).
4 After the network connection completes,
press to return to the network setup
interface, and select Next to proceed to the
next step.
Step 7: time zone selection
1 When the time zone interface appears as
Step 7, select and access the time zone
option.
2 After the time zone is set, press to return
to the time zone interface, select Next to
complete all the initial settings.
Image shape correction
You can correct distorted images to be
rectangular.
1 Press to access the settings
menu.
2 Use the Navigation buttons and OK to
select System - Key Stone.
3 Press / to correct the distorted image.
4 To exit setting mode, press or .
Set display format
Select a picture format to fit the projection
screen.
1 Press to access the settings menu.
2 Use the Navigation buttons and OK to
select Image - Format.
3 Press / to select a picture format:
Original, Full Screen, 16:9 and 4:3.
4 To exit setting mode, press or .