User manual

10 Philips · Screeneo U3
First time setup
When you turn on the projector for the first
time or the projector is reset to the factory
default settings, you are prompted to make the
following initial setup.
Step 1: language setting
The language menu pops up automatically.
Use the Navigation buttons and OK to select
your desired language for on-screen menus.
Step 2: apps installation
1 After setting language, installation of
Android based apps is automatically
started.
2 Wait until the installation completes.
The installed apps are to be displayed on
the home screen.
Step 3: accept EULA
After the apps installation completes, EULA
(End User License Agreement) appears on the
screen. Read and accept the Agreement to
proceed the setup.
Step 4: activate on-screen
pointer
Activate the on-screen pointer (mouse cursor)
to replace the function of the Navigation
buttons on the remote control. The on-screen
pointer is required when you browse the
Internet.
Before you can use the on-screen pointer, pair
the remote control with the projector.
1 When Step 4 is displayed, follow the on-
screen instructions: press and hold
and on the remote control simultaneously
for 5 seconds.
2 Release the buttons and wait until the
remote control is paired with the projector,
as indicated in the setup interface.
To use on-screen pointer
1 When the remote control is paired with the
projector, press on the remote control to
display or cancel the on-screen pointer.
2 When the pointer (angled arrow) is
displayed on the projection screen, hold
and move the remote control in the air,
then the pointer moves across the screen
correspondingly.
3 Press the OK button on the remote control
to confirm selection.
4 The on-screen pointer is disabled if you
press the Navigation button on the remote
control. To enable the on-screen pointer
again, press .
Step 5: image adjustment
Fit the image to the projection surface, and
adjust image focus.
1 To optimally fit the image to the projection
surface, turn the angle adjustment knobs
located on the bottom of the projector.