User manual

28 ENGLISH
Adjusting the Co ee Length
The machine allows you to adjust the quantity of co ee according to your
taste and the beverage setting ranges described in the "Factory Settings"
chapter. You can reduce it for a stronger taste or increase it for a lighter
one. Each button may be individually programmed for a speci c brew
setting.
1
Place a cup under the co ee dispensing spout.
2
Press and hold the “ ”, “ ” or “ ” button until the “MEMO” icon is
displayed. Then release the button. The machine is in programming
mode and starts brewing the selected product.
Note:
To exit programming press the “
” button once the “ ” is displayed. In
this case, the product quantity will not be saved.
3
The product quantity can be saved when the icon “ ” on the left bot-
tom corner of the display is shown.
GreenGreen Green
4
Press the “ ” button as soon as the desired co ee quantity is reached.
The icon on the left is displayed.
Note:
This icon is also displayed in case the maximum set level is reached.
The previously selected “ ”, “ ” or “ ” button is now programmed; each
time it is pressed, the machine will brew the same product length that was
just programmed.
Note:
The  gures relate to the
“ ” button programming.