User manual

20
Instructions
Istruzioni
www.philips.com/support
EN
Place a large container (1,5 l) under both the steam/hot wa-
ter wand and the dispensing spout.
Press the
button to start the descaling cycle.
The descaling solution will
be dispensed at intervals
(this takes about 20 min).
IT
Posizionare un contenitore capiente (1,5l) sotto il tubo va-
pore/acqua calda e sotto l'erogatore.
Premere il tasto
per avviare il ciclo di decalci cazione.
La soluzione decalci can-
te sarà erogata a intervalli
regolari (durata: circa 20
min).
EN
When this icon is displayed,
the water tank is empty.
Rinse the water tank and  ll it up to the CALC CLEAN level
with fresh water. Place it back into the machine.
Empty the drip tray and
place it back.
Empty the container and
place it back.
IT
Quando viene visualizzato
questo simbolo, il serbatoio
dell'acqua è vuoto.
Risciacquare il serbatoio e riempirlo con acqua fresca  no
al livello CALC CLEAN. Reinserirlo nella macchina.
Vuotare la vasca raccogli-
gocce e reinserirla in posi-
zione.
Vuotare il contenitore e
reinserirlo in posizione.
1
3
2
EN
Press the button to start the rinse cycle.
When the amount of water needed for the rinse cycle has
been completely dispensed, this icon is displayed. Press the
button to quit the descaling cycle.
IT
Premere il tasto per avviare il ciclo di risciacquo.
Quando l’acqua richiesta per il risciacquo è stata comple-
tamente erogata, la macchina visualizza questo simbolo.
Premere il tasto
per uscire dal ciclo di decalci cazione.
Note: If the water tank
has not been  lled up to
the CALC CLEAN level, the
machine might require
another rinse cycle. Re ll
the water tank and place
it back into the machine.
Repeat from step 14.
Nota: Se il serbatoio
dell’acqua non viene ri-
empito  no al livello CALC
CLEAN la macchina può ri-
chiedere l’esecuzione di
un’altro ciclo di risciac-
quo. Riempire il serbato-
io dell’acqua e reinserirlo
nella macchina. Ripetere
dal punto 14.
CALC
CLEAN