operation manual

4 Press the PUSH button and pull at the grip of the brew group to remove

it from the machine.

5 Clean the coffee exit duct thoroughly with a spoon handle or another

round-tipped kitchen utensil.

6 Clean the inside of the machine with a damp cloth.

7 Rinse the outside of the brew group under a lukewarm tap.

Warning: Never use any washing-up liquid or other cleaning agent

to clean the brewing unit.

Warning: Do not dry the brew group with a cloth to prevent fibers

from collecting inside the brewing unit.After rinsing, just shake

excess water off the brewing unit or let it air-dry.

8 Before you slide the brew group back into the machine, make sure the

two reference signs on the side match. If they do not match, perform the

following step:

Make sure the lever is in contact with the base of the brew group.

9 Make sure the locking hook of the brew group is in the correct position.

English