operation manual

-
The warning light flashes quickly. There is no water in the internal
circuit. Turn the control dial to the hot water icon and let hot water
come out of the machine until the water flows continuously. See
chapter ‘Preparing for use’ section ‘Heating up the machine’. Follow
steps 3 and 4.
-
The warning light flashes slowly. The brewing unit is not correctly
inserted, the coffee grounds container is not inserted, the service
door is open or the control dial is not in the correct position. Make
sure the brewing unit and coffee grounds container are inserted
correctly, the service door is closed and the control dial is in the
correct position. If you cannot take out the brewing unit or place it
back, switch the machine off and back on again.
-
All the lights flash slowly and simultaneously. The machine is out of
order. Switch off the machine for 30 seconds, then switch it back
on.Try this two or three times. If the machine does not reset,
contact the Philips Consumer Care Centre.
Disposal
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. For
recycling information, please contact your local waste management
facilities or visit www.recycle.philips.com.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide guarantee
leaflet. To buy spare parts, visit www.shop.philips.com/service or go
to your Philips dealer.You can also contact the Philips Consumer Care
Centre in your country.
Ordering maintenance products
-
Intenza+ water filter (CA6702)
-
Lubricant (HD5061)
-
Descaling solution (CA6700)
28
English