User manual
6
7 Press the on/off switch to switch off the
appliance. Let the appliance cool down for
at least 3 minutes before you start to brew
coffee.
5 Using the appliance
5.1 Brewing coffee
1 Open the lid (Fig. 3).
2 Fill the water tank with fresh cold water up to
the required level (Fig. 6).
• The indications on the left side of the
water level window correspond to large
cups (120ml).
• The indications on the right side of the
water level window correspond to small
cups (80ml).
3 Close the lid.
4 Place the jug on the hotplate.
B
Warning:
Make sure you place the jug properly on the
hotplate.
D
Note:
If you do not place the jug properly on the
hotplate, the drip stop prevents the coffee
5
6
fold the sealed edges to prevent tearing and
folding.
D
Note:
In this case you do not need to use paper
7
8
• This appliance is intended to be used in
household and similar applications such as:
•
other working environments;
• farm houses;
• by clients in hotels, motels and other
residential type environments;
• bed and breakfast type environments.
3.1Electromagneticelds
(EMF)
This Philips appliance complies with all standards
properly and according to the instructions in this
user manual, the appliance is safe to use based on
4 Beforerstuse
1
chapter ‘Cleaning’).
2
3 Put the plug in an earthed wall socket.
4 To store excess cord, push it into the opening
at the back of the coffee maker (Fig. 2).
B
Warning:
Make sure that the cord does not come into
contact with hot surfaces.
4.1 Flushing the appliance
1 Open the lid (Fig. 3).
2 Fill the water tank with fresh cold water up
to the MAX indication (Fig. 4).
3 Close the lid.
4 Put the jug on the hotplate.
5 Press the on/off switch to switch on the
appliance. (Fig. 5)
• HD7448: The power-on light goes on.
6 Let the appliance operate until all water has
run into the jug.
4222_001_9933_6_DFU-Redesign_A5_v1.indd 6 4-10-2012 9:42:09