Model HD6400W User Guide High Definition Projection Television A T S C C E R T I F I E D TM D I G I TA L T E L E V I S I O N
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your MARANTZ purchase is registered, you’re eligible to receive all the privileges of owning a MARANTZ product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
SAFETY INSTRUCTIONS - Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3.
TABLE OF CONTENTS 11 12 Getting Started 1 DTV Main Menu Picture Sound Speakers Features DTV Setup ATSC Digital On-Screen Menu Features Exit 2 10 3 9 4 8 7 6 5 Welcome/Product Registration ...................2 DTV SETUP Table of Contents.......................................................4 ✧Automatic Programming of Digital Channels and Tuning Program/Channel Selections..........35 Features, Model and Cabinet Information .................5 PICTURE MENU Safety/Precautions ..............
FEATURES ATSC Certified - for full compliance with analog NTSC and all 18 digital ATSC formats as specified by the Federal Communications Commission (FCC).
NTSC/ANALOG ON-SCREEN MENU FEATURES MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT FIRST TIME SETUP F irst Time Setup automatically takes care of some basic control feature settings for you. Follow the steps in this section to quickly add area channel numbers into the DPTV's scan system memory, and set the DPTV for your connected signal (Antenna or Cable.) You can also set-up your TV Smart Clock feature for the first time as well.
NTSC/ANALOG ON-SCREEN MENU FEATURES FIRST TIME SETUP (CONTINUED) P lease remember, SETUP is a first-use, one-time operation and will not have to be repeated after initial adjustments are made. Note: Press the “exit” button on the remote or DPTV to stop the SETUP operation at any time. MAIN MENU PICTURE 1ST TIME SETUP System is looking for time on channel X. Time was found on channel X. Time was not found on channel X. The time is 12:00PM.
NTSC/ANALOG PICTURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT SMART HELP COLOR, BRIGHTNESS, SHARPNESS, TINT, PICTURE NTSC T o adjust your DPTV color and picture controls, select a TV channel and follow the steps shown below: ANALOG MAIN MENU PICTURE FEATURES PICTURE MENU BEGIN 1 SOUND EXIT 1ST TIME SETUP Select BRIGHTNESS, PICTURE, COLOR, TINT, or SHARPNESS picture control.
NTSC/ANALOG PICTURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP RED/BLUE CONVERGENCE C onvergence is the correct lining up of the red and blue light paths on the DPTV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary. NTSC ANALOG MAIN MENU PICTURE SOUND PICTURE MENU FEATURES COLOR 1ST TIME SETUP 1 TINT EXIT BEGIN Select CONVERGENCE control. BRIGHT PICTURE SHARP CLEARVIEW MORE...
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT SMART PICTURE W ith Smart Picture you can set a number of video and audio controls to your own personal preference. Once the individual controls have been adjusted to the levels you desire, use the list of Smart Picture feature category titles to quickly reselect these “personalized” settings contained within the memory of the DPTV.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP SMART PICTURE F ollowing your initial setup adjustments (see previous page), just select the desired Smart Picture category in order to place the DPTV to the personalized set of audio and video control settings for that title. FEATURE MENU SMART PICTURE CABLE TUNING CLOSED CAPTION CHANNEL MEMORY SMART PICTURE BEGIN 1 MORE... EXIT Select the SMART PICTURE control.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT CLOSED CAPTION C losed Captioning (CC) allows you to read the voice content of NTSC television programs on the DPTV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress. CC NOTE: Not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP CABLE TUNING Y ou need to make sure the DPTV is set to pick up either Cable TV or Antenna signals. In other words, the DPTV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug. NTSC ANALOG MAIN MENU NOTE: If you went through First Time Setup (see page 6), this task has already been completed for you.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT CHANNEL MEMORY AUTO-PROGRAMMING our DPTV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL ▲▼ buttons are pressed. Y NTSC ANALOG MAIN MENU PICTURE NOTE: If you went through First Time Setup (see page 6), this task has already been completed for you.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP ADD/DELETE CHANNELS A uto-Programming (see previous page) adds all the channels it can find (on your Antenna or Cable TV system) into the DPTV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the DPTV's memory. NTSC ANALOG MAIN MENU PICTURE 1 SOUND FEATURE MENU FEATURES BEGIN Select CHANNEL MEMORY (ADD/DELETE CHANNELS) control.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT DISPLAY FORMAT Y our DPTV is able to deliver the lifelike, widescreen picture (or “home cinema” viewing experience) that is promised with High Definition TV programming. The Display Format control can be used to expand conventional 4:3 aspect ratio (width-to-height) broadcasts in order to fit your DPTV’s widescreen 16:9 format; or to reset the screen to best match the current programming.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP CHANNEL DISPLAY W ith the Channel Display control you can change the size and location of the on-screen channel and clock information. NTSC FEATURE MENU DISPLAY FORMAT CHANNEL LABELS CHANNEL DISPLAY PARENTAL CONTROL CHANNEL DISPLAY LARGE BEGIN 1 Select CHANNEL DISPLAY control. 2 Press the MENU ▲▼ and MENU (or ok) buttons to highlight and select (U) the LARGE or SMALL display control.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT CHANNEL LABELS D o you ever have trouble remembering on which channel a particular station or network is located? The Channel Labels Control is a quick way to view and select channels from a list of Labeled channels. NTSC FEATURE MENU A Label is a four letter callout you can set to appear with the onscreen channel number. Example Label: WXYZ - for a TV station's call letters.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP PARENTAL CONTROL SETUP CODE NUMBER arental Control allows parents to block out, or "censor", any channels they think children should not watch. A channel placed under Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing. P NOTE:Your TV left the factory with the Parental Code set to "0000".
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT PARENTAL CONTROL CHANNEL BLOCKING fter your personal Parental Code number has been set (see previous page), you are now ready to select the channels you want to block out or censor. A NTSC PICTURE Select the PARENTAL CONTROL. 1 Press the MENU ▲▼ and MENU (or ok) buttons to highlight and select the BLOCK CHANNELS item.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP PARENTAL CONTROL CONTENT ADVISORY nother new area available to parents for the censoring of program material is through the TV Guidelines and Movie Ratings system. Program Content Advisory data will soon be contained within the broadcast signals of received TV programs.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT CONTENT ADVISORY MOVIE RATINGS M ovie Ratings set viewing access levels for TV programming according to current Motion Picture Association of America (MPAA) ratings. These ratings are similar to the categories used with the rated movies appearing in cinema theaters and with video rental material.
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP CONTENT ADVISORY PARENTAL GUIDELINES arental Guidelines can be even more defined and specific in the degree and extent of material parents may allow for TV program viewing. Sub-settings for Language, Violence, and other blocking factors can be manually switched On or Off for use within the major Parental Guideline categories (TV-Y7, TV-PG, etc.).
NTSC/ANALOG FEATURE MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT CONTENT ADVISORY BLOCKING OPTIONS he Content Advisory system also has “Blocking Option”controls which can be used to deny viewing access for channel programs and movies even when they are “unrated”, or contain “no rating” information as broadcasted.
NTSC/ANALOG SOUND MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP BASS, TREBLE, BALANCE Y our DPTV also has individual sound adjustment controls. The BASS (low frequency), TREBLE (high frequency) , and Speaker BALANCE may all be used to adjust the sound playback of NTSC TV programs. NTSC ANALOG MAIN MENU PICTURE BEGIN 1 SOUND FEATURES Select BASS, or TREBLE, or BALANCE sound control. SOUND MENU EXIT 1ST TIME SETUP With the SOUND MENU onscreen, move the RED highlight with the MENU buttons.
NTSC/ANALOG SOUND MENU CONTROLS MAIN MENU SOUND FEATURES EXIT SMART HELP STEREO Y our DPTV is able to receive broadcast stereo TV programs. The DPTV is equipped with an internal amplifier and speaker system through which the stereo sound can be heard. NTSC BEGIN 1 Remember. If a stereo signal is not available and the DPTV is placed in STEREO, the sound coming from the unit will remain monaural (mono). ANALOG MAIN MENU PICTURE Select STEREO sound control.
NTSC/ANALOG SOUND MENU CONTROLS MAIN MENU PICTURE 1ST TIME SETUP DISPLAY VOLUME U se the DISPLAY VOLUME control to see program volume level settings on the DPTV screen. Once set, the Volume Display will be seen each time the VOLUME buttons (on the DPTV local keyboard or remote) are pressed. NTSC ANALOG MAIN MENU BEGIN 1 PICTURE Select DISPLAY VOLUME control. SOUND 3 BALANCE STEREO DISPLAY VOLUME AVL MORE...
NTSC ANALOG SOUND MENU CONTROLS MAIN MENU PICTURE SOUND FEATURES 1ST TIME SETUP EXIT AUTOMATIC VOLUME LIMITER re you tired of the sound of commercials following you into the next room or all through the house? The Automatic Volume Limiter (AVL) control allows you to preset a desired volume level that the DPTV sound will not go above. This makes for an even, more consistent sound by reducing the “peaks” and “valleys” that can occur during program changes or commercial breaks.
REMOTE CONTROL NTSC/ANALOG FEATURES ANALOG TV MODE T he Remote Control contains three display screens of “Analog TV” related controls. Use the touchscreen controls to access and adjust NTSC features for Input selection and Menu feature adjustments. Note: For battery installation and other details on the initial use of the remote control also refer to the HD6400W Quick Use guide included with your DPTV.
AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX1/2 INPUTS T he Analog Audio/Video Input jacks are for direct NTSC picture and sound connections between the DPTV and auxiliary equipment (VCR, DVD Player, etc.) that has Audio/Video Output jacks.
AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX 3 INPUTS or more convenient Direct playback connections use the DPTV's Front Audio/Video Input panel (located on the DPTV's right front side panel). These Inputs allow for quick and easy access, particularly for the playback of Camcorder tape recordings. F PICTURE AND SOUND FROM PLAYBACK OF CAMCORDER TAPE FRONT AUDIO/VIDEO JACKS AUX3 Inputs located on right front side panel of DPTV.
AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX1 - S-VIDEO INPUTS T he S(uper)-Video connections on the rear of the DPTV offer improved picture detail and clarity for the playback of S-VHS VCR tapes or DVDs over a standard composite video input connection. PICTURE AND SOUND FROM PLAYBACK OF SVHS VCR TAPE PLAYBACK REAR OF DPTV NTSC S VIDEO 2 ANALOG Note: The VCR (or DVD Player) must have a S-VIDEO OUT(put) jack in order for you to complete the connections shown on this page.
AUDIO/VIDEO DVD (COMPONENT INPUT) CONNECTIONS COMPONENT VIDEO INPUTS 2 C omponent Video Inputs provide for the highest possible color and picture resolution in the playback of digital signal source material such as with DVD players. The color difference signals (PB, PR) and the luminance (Y) signal are connected and received separately which permits for improved color bandwidth information (not possible when using composite video or S-Video connections).
SYSTEM AUDIO OUTPUT CONNECTIONS SYSTEM AUDIO OUTPUTS The System Audio Out(put) jacks send the DPTV’s current audio (ATSC, NTSC, or Monitor) to an external amplifier for output. The advantage of such an additional System Audio Out connection (as shown in this diagram) is that it could continue to route the supplied audio signals from the DPTV to an external amplifier or Pro Logic Receiver (even when the selected program source switches between a digital ATSC program, NTSC, or Monitor supplied source).
ATSC/DIGITAL ON-SCREEN MENU FEATURES DTV Main Menu Picture Sound Speakers Features DTV Setup Exit DTV SETUP (AUTOPROGRAM) O nce connected to receive digital ATSC broadcast signals, available area channels can be added into the DPTV’s channel scan memory by the use of the DTV Setup Menu. Press the remote’s “DTV” Command mode button (or the “Source” button on the DPTV’s local keyboard) to select the ATSC operating mode.
ATSC/DIGITAL PICTURE MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit COLOR, BRIGHTNESS, SHARPNESS, TINT, PICTURE T o adjust your ATSC color and picture controls, select a digital channel and follow the steps shown below: ATSC BEGIN 1 Select the ATSC Picture Menu. DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup With the DTV Main Menu onscreen, move the highlight with the MENU ▲▼ buttons. Then press the MENU (or ok) button.
ATSC/DIGITAL PICTURE MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit RED/BLUE CONVERGENCE C onvergence is the correct lining up of the red and blue light paths on the DPTV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary. ATSC DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup BEGIN 1 Select the ATSC Convergence control.
ATSC/DIGITAL SOUND MENU CONTROLS SURROUND SOUND B y adding optional external speakers to the DPTV's sound system, you can create the feeling of reflected sound that surrounds you at a movie theater or concert hall. REAR OF DPTV REAR SURROUND SOUND SPEAKER TERMINALS (Operational only in ATSC or Monitor Display modes) BEGIN 1 Connect both external speakers to the speaker wire terminals on the DPTV. + Recommended speakers: 25W, 8 ohm minimum.
ATSC/DIGITAL SOUND MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit SURROUND SOUND T he Surround Sound control option allows you to select the type of sound mode sent to the DPTV’s speaker system. ATSC DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup BEGIN 1 Select the ATSC Sound Menu. With DTV Main Menu on-screen, move the highlight with the MENU ▲▼ buttons. Then press the MENU (or ok) button.
ATSC/DIGITAL SOUND MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit DOLBY DIGITAL SURROUND ADDITIONAL CONNECTIONS Center Channel Input terminal is also located on the rear of the DPTV for additional Dolby Digital Surround sound connection options. This input can be used to connect an external Dolby Digital, or Home Theater Surround Sound, capable Amplifier (with Center Channel output) in order to play Center Channel sound through the DPTV’s internal cabinet speakers.
ATSC/DIGITAL SOUND MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit BASS, TREBLE T he DPTV also has individual sound adjustment controls for the ATSC system audio. The BASS (low frequency) and TREBLE (high frequency) controls may be used to adjust the sound of ATSC TV programs, or other external playback source material. ATSC DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup Exit BEGIN 1 Select Bass or Treble sound control.
ATSC/DIGITAL SPEAKERS MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit SPEAKERS T he Speakers Menu involves various setup and function aspects of multichannel speaker configurations possible within Dolby Digital Surround Sound system playback. Basically, the Speakers Menu controls deal with distinct “one-time” settings for such items as speaker volume levels and sound delay (as related to speaker distance and listening room size dimensions).
ATSC/DIGITAL SPEAKERS MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit TEST TONE T he Test Tone Speaker Menu control generates a sound test signal that can be used to adjust individual DPTV speakers to desired volume levels. The Test Tone signal will be directed to each audio speaker channel separately (both internal DPTV cabinet speakers and external Speaker Output terminal connections) when the control is turned On.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit CAPTIONS FORMAT T he Captions Format control is used to set the DPTV to receive the ATSC mode Closed Caption (CC) feature. ATSC Closed Caption presents the viewer with program dialogue and conversations as written on-screen “text box” windows. ATSC DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup BEGIN 1 Select the ATSC Features Menu.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit ADD/DELETE CHANNEL T he DTV Setup Menu control (see page 35) autoprograms all available signal ATSC digital channels into the DPTV’s scan memory. Use the Add/Delete Channel control to eliminate or add to the specific list of “major” channels contained within the DPTV’s scan memory.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit PARENTAL CONTROL SETUP CODE NUMBER arental Control allows parents to block out, or "censor", any channels they think children should not watch. A channel placed under Parental Control cannot be viewed until a correct access code is used to unlock the channel for viewing. P NOTE:Your TV left the factory with the Parental Code set to "0000".
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit PARENTAL CONTROL CHANNEL BLOCKING fter your personal Parental Code number has been set (see previous page), you are now ready to select the channels you want to block out or censor. A ATSC BEGIN DTV Main Menu Picture Sound Speakers Features Tuning Program DTV Setup Select the PARENTAL CONTROL. 1 With FEATURES MENU on screen, move the RED highlight with the MENU buttons.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit PARENTAL CONTROL CONTENT ADVISORY nother new area available to parents for the censoring of program material is through the TV Guidelines and Movie Ratings system. Program Content Advisory data will soon be contained within the broadcast signals of received TV programs.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit CONTENT ADVISORY MOVIE RATINGS M ovie Ratings set viewing access levels for TV programming according to current Motion Picture Association of America (MPAA) ratings. These ratings are similar to the categories used with the rated movies appearing in cinema theaters and with video rental material.
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit CONTENT ADVISORY PARENTAL GUIDELINES arental Guidelines can be even more defined and specific in the degree and extent of material parents may allow for TV program viewing. Sub-settings for Language, Violence, and other blocking factors can be manually switched On or Off for use within the major Parental Guideline categories (TV-Y7, TV-PG, etc.).
ATSC/DIGITAL FEATURES MENU CONTROLS DTV Main Menu Picture Sound Speakers Features DTV Setup Exit CONTENT ADVISORY BLOCKING OPTIONS he Content Advisory system also has “Blocking Option”controls which can be used to deny viewing access for channel programs and movies even when they are “unrated”, or contain “no rating” information as broadcasted.
REMOTE CONTROL ATSC DIGITAL FEATURES DIGITAL TV MODE T he Remote Control contains touchscreen displays for “DTV” related controls. Use the remote’s touchscreen buttons to access and adjust the DPTV for dedicated ATSC mode features, as well as perform on-screen Menu adjustments and select other program functions. Note: For battery installation and other details on the initial use of the remote control also refer to the HD6400W Quick Use guide included with your DPTV.
MONITOR FEATURES MENU CONTROLS BRIGHTNESS PICTURE SHARPNESS SVM OFF COLOR TINT VOLUME BAR ON VGA/SVGA/HDCOMPONENT A nother function of the DPTV is for the connection and use of Personal Computers (PCs), and other High Definition (HD) digital source equipment, through the DPTV’s Monitor inputs and display mode. Dedicated Audio Input jacks (located on the rear of the DPTV) are also paired to the external source Monitor Video Inputs (VGA and HD Component Video In) for audio playback connections as well.
MONITOR FEATURES MENU CONTROLS BRIGHTNESS PICTURE SHARPNESS SVM OFF COLOR TINT VOLUME BAR ON MONITOR MENU CONTROLS T he Monitor Menu feature controls are to aid you in setting up the DPTV for the best in display image quality. Generally, the Monitor feature controls cover the basics in color and video image screen adjustments.
TIPS IF SOMETHING ISN'T WORKING P lease make these simple checks before calling for service. These tips can save you time and money since charges for DPTV installation and adjustment of customer controls are not covered under your warranty.
INDEX Add/Delete Channels ..................6, 14-15, 35, 45, *Q/U-2, 5, 6 High Definition Component Inputs.................53-54, *Q/U-2, 7 Audio Controls.........................25-28, 38-41, *Q/U-2, 4, 5, 6, 7 Inputs (Audio and Video) ................................30-34, 39-40, 53 Audio/Video Inputs.........................30-34, 38-40, 53 *Q/U-2, 7 LCD Remote Control .............................29, 52, *Q/U-3, 4, 6, 7 Automatic Programming ..................................
GLOSSARY TO TELEVISION TERMS Audio/Video Inputs * Located on the rear of the DPTV these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. Programming * The procedure of adding or deleting channel numbers into the DPTV’s memory circuits.
Philips Consumer Electronics Company Factory Service Center Locations See Reverse Side for More Details. ★ Seattle/Tacoma Area Detroit/Toledo • Cleveland/ • • N Ohio • • Chicago ★ Columbus • San Francisco/Metro Area ★ Los Angeles • Charlotte • Knoxville/E Tennessee • ★ Pittsburgh/WV Area • Atlanta/N Georgia ★ Dallas ★ Wash/Balt ★ Orlando • ★ Indicates In-Home Service Only 1-800-242-9225 • Philadelphia/S New Jersey Houston/Galveston Beaumont/Austin San Antonio • Tampa/W Florida • Ft.
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
LIMITED WARRANTY DIGITAL PROJECTION TELEVISION Two Years Free Labor Two Years Free Service on Parts Two Years Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen This product can be repaired in-home. WHO IS COVERED? MAKE SURE YOU KEEP... You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.
