kettle cordless bell signal HD4651
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and or injury to persons including the following: Read all instructions before using. 1. Do not touch hot surfaces. Use handles or knobs. Care must be taken to prevent burns which can occur from touching hot parts or from spilling hot liquids. 2. To protect against electrical shock, do not immerse cord, plug, or base of appliance in water or other liquid. 3.
11. Do not use outdoors. 12. Do not let cord hang over edge of table or counter, or touch hot surfaces. Operate on a flat surface away from edge of counter top to prevent accidental tipping. 13. Do not place on or near a hot gas or electric burner, or in heated oven. 14. Do not remove lid during boiling cycle, as scalding may occur. 15. Do not use this appliance for other than intended use described in this manual.This appliance may be used for heating water only. 16.
CAUTION • Do not immerse base or Kettle in water. • To reduce the risk of fire or electric shock, do not remove the bottom cover of base. No user serviceable parts inside. Return the Kettle to the retail location where it was purchased for examination, repair or adjustment. SPECIAL INSTRUCTIONS The Kettle has a short cord to reduce the hazards of becoming entangled in or tripping over a longer cord. An extension cord may be used if the rating is equal to or greater than the rating of the Kettle.
Table of Contents Features 2 Using the Kettle 3-4 Cleaning the Appliance 4 Cleaning the Anti-Scale Filter 5 Descaling 6 For Assistance 7 Warranty Back Cover
2 Features On (l ) /Off (O) Button Pilot Light Lid Spout Unit Base Pirouette Center Connector • Anti-Scale Filter Water Window 10 cups (1.
3 Using the Kettle C 1 Wind excess power cord around the bottom of the appliance base. 2 Place the base of the Kettle on a cool, even level surface, out of the reach of children. Plug cord into a 120V AC electrical outlet. Only use the Kettle in combination with its original base. 3 Fill the Kettle with water. Do not put less than 4 oz. / 0.1 liters of water in the Kettle. Never fill the Kettle while it is standing on its base. If the Kettle boils dry, it will switch off automatically.
4 C 6 Press the On (l) /Off (O) button ON (l). The Kettle starts heating up and the Pilot Light will illuminate. C 7 You can interrupt the boiling process by pressing the On (l) /Off (O) button OFF (O). C 8 The appliance switches off automatically and a bell signals when the water reaches the boiling point. 9 Remove the Kettle from base to pour. • If Kettle is used often, steam condensation may collect in small amounts in the Kettle base.
5 Cleaning the Anti-Scale Filter Scale is not harmful but it may give your drink a powdery taste. The anti-scale filter prevents scale particles from ending up in your drink. Clean the filter regularly. Switch Kettle OFF (O). Unplug the base from electrical outlet. C 1 Remove the filter. C 2 Clean the filter under running tap water while gently brushing the filter with a soft nylon brush. C 3 Properly snap the filter into Kettle. Warning Do Not put the scale filter loosely into the Kettle.
6 Descaling Regular descaling will prolong the life of the appliance. When you descale the Kettle, you can also descale the filter at the same time by simply leaving it in the appliance. Depending on the hardness of the water, small spots may appear on the heating elements. Scale build up is perfectly normal. Scale is harmless, but left unattended it can hinder optimal Kettle performance. De-scale regularly.
7 For assistance For assistance call toll free: 1-800-243-7884 or visit our website: www.philipsonline.
FULL ONE YEAR WARRANTY Philips Electronics North America Corporation warrants each new Philips product, model HD4651 (except cord), against defects in materials or workmanship for a period of one year from the date of purchase. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.
