User manual

8
Adjusting functions
1 Use the ¡ and ™ buttons to switch from function to function (fig. 18).
The blinking symbol indicates which function is being adjusted.
2 Options:
- Select • to set the time.
- Select ª to set the facial tanner.
- Select ≠ to set the body cooler.
Setting the time for a tanning session
1 Select • to set the time.
2 Press the ¢ button to put the time forward and push the £ button to put the time backward (fig. 19).
Keep the button pressed in to adjust the time more quickly.
Setting the facial tanner
1 Select ª to set the facial tanner.
2 Press the ¢ and £ buttons to set the intensity of the facial tanner (fig. 20).
- O = off
- 1 = 50% of its full intensity
- 2 = full intensity
◗ If you have not set the intensity within approx. 5 seconds, the set tanning time will be shown on the display again.To set the facial
tanner, select ª.
◗ If you do not set the facial tanner, the facial tanner will burn at full intensity.
Setting the body cooler
1 Select ≠ to set the body cooler.
2 Press the ¢ and £ buttons to set the fan power of the body cooler (fig. 21).
- O = no body cooling
- 1 = body cooler fan at minimum setting
- 2 = body cooler fan at moderate setting
- 3 = body cooler fan at high setting
- 4 = body cooler fan at maximum setting
◗ If you have not set the fan power within approx. 5 seconds, the set tanning time will be shown on the display again.To set the body
cooler, select ≠.
◗ If you do not set the body cooler, the body cooler fan will work at maximum setting.
Tanning
1 Put on the protective goggles provided.
2 Switch the tanning lamps on by pressing the green I button.
◗ The display shows the remaining tanning time.
◗ During the tanning session, the dot next to the time indication blinks.
◗ If you want to switch the appliance off during the tanning session, press the red O button.
B
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol – and the remaining cooling time (180-0 seconds) are shown on the display.
◗ You can adjust the intensity of the facial tanner during the tanning session. Use the ¡ and ™ buttons to select ª and then set the
required intensity.The new setting becomes active immediately.
B
If you have not set the intensity within approx. 5 seconds, the remaining tanning time will be shown on the display again.
B
If you want to set the facial tanner from O (off position) to 1 or 2 while the lamps have not yet cooled down sufficiently, the O symbol will blink on
the display.
◗ You can adjust the fan power of the body cooler during the tanning session. Use the ¡ and ™ buttons to select ≠ and then set the
required power.The new setting becomes active imediately.
B
If you have not set the fan power within approx. 5 seconds, the remaining tanning time will be shown on the display again.
◗ During the last 5 seconds of the tanning session,you will hear a beeping sound and the appliance will switch off automatically after these
5 seonds.
B
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol – and the remaining cooling time (180-0 seconds) are shown on the display.
Adjusting the appliance
Owner's instructions for adjusting the appliance
B
This part of the manual contains information about additional adjustment options for the owner.
Setting the additional options
Freezing the set time
1 Select • to set the time.
B
Press the ¢ button to put the time forward and push the £ button to put the time backward.
B
Keep the button pressed in to adjust the time more quickly.
2 Hold down the red O button while pressing the ¢ button, the £ button and the ¢ button in succession.Then release the O button.
The set time is now frozen.
B
The set time can no longer be adjusted.
◗ Symbol • stops blinking.
3 Switch the tanning lamps on by pressing the green I button.
ENGLISH