Important Information Manual

< Page 2 >
Operation issues
Question Why does my Dashcam not start working when the power cable is plugged in?
Answer For some cars, the cigarette lighter does not provide power until the engine is on. So
please start your car engine rst. For some dashcams (ADR810s, ADR900), you must
also turn on the power button on the device.
If the Dashcam still fails to turn on, please check the power cable is functioning by
connecting it to other devices. If all above eorts fail, please contact our technical
support center.
Question Is the Dashcam working when the screen is o?
Answer For safety reasons, the LCD screen will turn o after 3 minutes of recording. However,
this doesn’t mean that Dashcam stops working. The device will continue to record
after the screen has switched o. As long as the LED indicator is on, or is blinking, you
know your device is working. You can adjust the LCD screen ON/OFF function in the
settings.
Question When the emergency recording is on, can I use other features at the same time?
Answer No. When the emergency mode has been triggered, your Dashcam will focus on
recording all information that it can, so other functions will be deactivated. For safety
reasons, you can NOT operate the Dashcam at this time.
Question Does the Dashcam power on and o automatically?
Answer Yes. When you switch the car engine on, the Dashcam will start recording automatically.
Likewise, when the engine is turned o, the Dashcam will also switch o. Or, if you have
an Dashcam with WaveGuard functionality, it will enter parking surveillance mode.
Question Why would the Dashcam continue to work after the car is turned o?
Answer When the engine is o, the cigarette lighter can still draw power in some car models.
So your Dashcam could still use electricity from the car battery. To avoid this, please
unplug the power cable from the socket to avoid draining the car battery when you’re
not in your car.
Question When I start the ignition, why does the Dashcam turn o and then on again?
Answer When we turn on the ignition, the car’s battery needs all available power to start the
engine. So at that moment, all other devices will be turned o temporarily, including
the Dashcam. Once the ignition system has nished its job, the car battery begins to
power other devices, so the Dashcam will turn on again.
Question When the Dashcam is connected to a computer, can it still record?
Answer When connected to computer, the Dashcam will switch to data transfer mode. So it
cannot record at the same time.
Dashcam | FAQs