User Guide

M
D
A
T
H
I
J
U
V
A Hanger hook
D Air vent slide
U Steamer power-on button with light
V Blowing/suction button
T Steam activator
H Board tilting button
I Height adjustment lever
J Locking strap
M Mains plug
Steaming
Put the mains plug M in an earthed
wall socket. The power-on light goes on.
Fill the water tank.
Undo the locking strap J and unfold
the ironing board to vertical position.
Set both air vent slides D to
the ironing position.
Take the steamer out of the steamer
compartment.
Switch the steamer on by pressing
the steamer power-on button U.
The power-on light goes on.
After approx. 2 minutes the
steamer is ready for use.
Press the steam activator T.
Never direct the steam
at people.
If you want to steam in the blowing
mode, press the rounded side of the
blowing/suction button.
If you want to steam in the suction
mode, press the hollow side of the
blowing/suction button.
You can easily hang the steamer on
the board handle G when necessary.
You can store the hot steamer in the
heat-resistant storage compartment
immediately after you have switched
the steamer off.
6
4
5
3
2
1
E Steaming tips and tricks
The steamer is perfect for all delicate fabrics, such as silk,
wool and cashmere.
To steam a jacket, put it directly on the board. To steam a
blouse or a dress, use the hanger hook A.
•
•
2
7