User Manual
Table Of Contents
7
ENGLISH
2 Putthewatertankbackintotheappliancebyttingthebottompartintothe
appliancerst.
3 Pushinthetoppartofthewatertankuntilitlocksintoplace(‘click’).
Water tank empty light
and press the steam trigger to let the appliance heat up again. When the ‘iron ready’ light
Using your appliance
OptimalTEMP technology
without adjusting the iron temperature setting.
and rayon (Fig. 2).
Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as
prints on garments (Fig. 3).
ironing board cover (Fig. 4).
Ironing
before you use the appliance. Save them for future reference.
1 Pressandholdthesteamtriggertostartironing(Fig.5).
Never direct steam at people.
Note: For best result on tough fabrics such as cotton, linen and jeans, keep the steam
trigger pressed continuously when you move the iron over the fabric. Then move the iron
over the same area a few more times without steam to dry the fabric.
Note: For the best results on silk and shiny synthetic fabrics, it is recommended to keep the
steam trigger pressed continuously while ironing.
sensor and intelligent automatic steam mode
The intelligent sensor inside your iron knows exactly when and how your iron is
sensor will start
recognizing the movements of your iron and will enable your iron to release the right amount
of steam automatically without you having to press the steam trigger. This will help you to get
great results faster and easier.
button on top of the iron handle. The intelligent automatic steam light turns on (Fig. 6).