User Guide

9
Problem Possible cause Solution
The appliance is not hot enough
to produce steam.
Wait until the ‘iron ready’ light on the iron lights
up continuously.
You did not press the steam trigger. Press the steam trigger and keep it pressed
while you iron.
The water tank is not placed in the
appliance properly.
Slide the water tank back into the appliance
rmly (‘click’).
The appliance is not switched on. Insert the plug in the wall socket and press the
on/o button to switch on the appliance.
The appliance has
switched o. The
light in the on/o
button ashes.
The auto-o function is activated
automatically when the appliance
has not been used for more than 10
minutes.
Press the power on/o button to switch on the
appliance again.
The appliance
produces a
pumping sound.
Water is pumped into the boiler
inside the appliance. This is
normal.
If the pumping sound continues nonstop, switch
o the appliance and remove the plug from the
wall socket. Contact an authorised Philips
service centre.
ENGLISH