operation manual

7
ENGLISH
Water tank empty light
When the water tank is almost empty, the ‘water tank empty’ light ashes. Fill the water tank and press
the steam trigger to let the appliance heat up again. When the ‘iron ready’ light lights up continuously, you
can continue steam ironing.
Using your appliance
OptimalTEMP technology
The OptimalTEMP technology enables you to iron all types of ironable fabrics, in any order, without
adjusting the iron temperature setting.
Fabrics with these symbols are ironable, for example linen, cotton, polyester, silk, wool, viscose and rayon
(Fig. 2).
Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as Spandex or
elastane, Spandex-mixed fabrics and polyolens (e.g. polypropylene), but also prints on garments (Fig. 3).
During ironing, you can place the iron either on the iron platform or horizontally on the ironing board.
Thanks to the OptimalTEMP technology, the soleplate will not damage the ironing board cover (Fig. 4).
Ironing
Read this user manual, the important information leaet, and the quick start guide carefully before you
use the appliance. Save them for future reference.
1 Press and hold the steam trigger to start ironing (Fig. 5).
Never direct steam at people.
Note: For best result on tough fabrics such as cotton, linen and jeans, keep the steam trigger pressed
continuously when you move the iron over the fabric. Then move the iron over the same area a few more
times without steam to dry the fabric.
Note: For the best results on silk and shiny synthetic fabrics, it is recommended to keep the steam
trigger pressed continuously while ironing.
sensor and intelligent automatic steam mode
The intelligent sensor inside your iron knows exactly when and how your iron is moving.
When you activate intelligent automatic steam mode, the sensor will start recognizing the
movements of your iron and will enable your iron to release the right amount of steam automatically
without you having to press the steam trigger. This will help you to get great results faster and easier.
- To activate the intelligent automatic steam mode, press the intelligent automatic steam button on top
of the iron handle. The intelligent automatic steam light turns on (Fig. 6).
- The ‘iron ready’ light moves back and forth when the iron is moving.
Note: in intelligent automatic steam mode, steam comes out automatically when you move the iron
and stops when you stop moving the iron (Fig. 7). You can still press the steam trigger in this mode to
activate the steam when the iron is not moving.
- You can use the intelligent automatic steam mode in all steam settings, including ECO and MAX.
Note: for your safety, in intelligent automatic steam mode, the steam stops when the soleplate is tilted.