operation manual

Note: The appliance is not switched off completely when it is in safety auto-off mode.
To switch off the appliance, press the on/off button.
Turbo steam
For faster ironing and a higher amount of steam, you can use Turbo steam.
1 Press and hold the on/off button for 2 seconds until the light turns white. (Fig. 16)
2 TodeactivateTurbosteam,pressandholdtheon/offbuttonagainfor2seconds
until the white light turns blue
Ironing tips
Minimising wrinkles while drying
Start wrinkle removal early in the drying process by spreading out your laundry properly after
washing and by putting garments on hangers to make them dry naturally with fewer wrinkles.
Best practice shirt ironing
Start with the time-consuming parts like collar, cuff links and sleeves. Next, iron the bigger parts like front
and back to prevent wrinkling the bigger parts when you are busy ironing the time-consuming parts.
Collar: When you iron a collar, start on its underside and work from the outside (the pointy end)
inwards. Turn over and repeat. Fold down the collar and press the edge for a more crisp nish.
Buttons: Iron on the reverse side of the buttons for more effective and faster ironing.
Cleaning and maintenance
To properly maintain your appliance, clean the iron and the appliance regularly.
1 Cleantheappliancewithamoistcloth.Toremovestubbornstains,youcanuseasmall
amountofwashing-upliquid.
2 Toeasilyandeffectivelyremovestainsfromthesoleplate,switchontheapplianceand
let it heat up. When the appliance has heated up, move the iron over a moist cloth
while you press the steam trigger (Fig. 17).
Tip: Clean the soleplate regularly to ensure smooth gliding.
IMPORTANT - DESCALING
It is very important to perform the descaling procedure as soon as the
EASY DE-CALC light starts to ash and the appliance beeps continuously.
The EASY DE-CALC light ashes and the appliance beeps continuously after about
a month or 10 ironing sessions to indicate that the appliance needs to be descaled.
Perform the following descaling procedure before you continue ironing.
To avoid the risk of burns, unplug the appliance and let it cool down for at least
two hours before you perform the descaling procedure.
1 Remove the plug from the wall socket (Fig. 18).
2 Place the appliance on the edge of the tabletop.
3 Holdacup(withacapacityofatleast350ml)undertheEASYDE-CALCknob
and turn the knob anticlockwise (Fig. 19).
ENGLISH8