operation manual

Optimal Temp Technology
The Optimal Temp Technology enables you to iron all types of ironable fabrics, in any order,
without adjusting the iron temperature setting.
Fabrics with these symbols are ironable, for example linen, cotton, polyester, silk, wool, viscose
and rayon (Fig. 6).
Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as Spandex
or elastane, Spandex-mixed fabrics and polyolens (e.g. polypropylene), but also prints on
garments (Fig. 7).
Ironing
1 Place the steam generator on a stable and even surface.
2 Makesurethatthereisenoughwaterinthewatertank(seesection‘Fillingthewatertank’).
3 Put the mains plug in an earthed wall socket and press the on/off button to switch on the
steamgenerator.Thebluepower-onlightontheapplianceandthe‘ironready’lightstartto
ashtoindicatethattheapplianceisheatingup(thistakesapprox.2minutes).(Fig.8)
, Whentheapplianceisreadyforuse,the‘ironreadylight’andthepower-onlightstopashing
andlightupcontinuously.Additionallyyouhearashortbeep.
4 Press the carry lock release button to unlock the iron from the iron platform (Fig. 9).
5 Press and hold the steam trigger to start ironing. (Fig. 10)
Never direct steam at people.
Steam boost function
The steam boost function is designed to help tackle difcult creases.
- Double press the steam trigger for a continuous shot of steam. It is not necessary to press
and hold the steam trigger continuously when the steam boost function is activated.
To stop the steam boost function, press the steam trigger once. (Fig. 11)
Vertical ironing
Hot steam is emitted from the iron. Never attempt to remove creases from a garment
thatsomeoneiswearing.Donotapplysteamnearyourorsomeoneelse’shand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch the garment
slightly with the soleplate (Fig. 12).
Putting down the iron during ironing
- During ironing, you can place the iron either on the iron platform or horizontally on the ironing
board. Thanks to the OptimalTemp technology, the soleplate will not damage the ironing board
cover (Fig. 13).
Energy saving
ECO mode
- By using the ECO mode (reduced amount of steam), you can save energy without
compromising on the ironing result. The green light is on (Fig. 14).
- You can deactivate the ECO mode by pressing the ECO button. The green light goes off.
Safety auto-off mode
- To save energy, the appliance switches off automatically when it has not been used for
10 minutes. The auto-off light in the on/off button starts to ash (Fig. 15).
- To activate the appliance again, press the on/off button. The appliance then starts to heat up again.
ENGLISH 7