User Manual

Steam trigger
- Press and hold the steam trigger to start ironing. Keep the
steam trigger constantly pressed when you move the iron
over the fabric.
Steam boost function
- Press the steam boost button to remove stubborn
wrinkles.
For more powerful steam, you can use the turbo steam mode.
1 Press and hold the on/off button for 5 seconds until the
light turns white.
2 The appliance returns to normal steam mode
automatically after 15 minutes to save energy.
3 Otherwise, to switch back to normal steam mode at any
time, press and hold the on/off button for 2 seconds until
the light turns blue again.
Vertical ironing
- Hold the iron in vertical position. Touch the garment lightly
with the soleplate of the iron. Press the steam trigger to
steam the garment and remove wrinkles.
Tip: Pull the garment with one hand to stretch it for more effective
wrinkle removal.
4 When you put down the iron during ironing, put it on the
iron platform or on its heel.
H
ot steam is emitted from the iron. Never attempt to remove
wrinkles from a garment while someone is wearing it. Do not
apply steam near your or someone else’s body to prevent burns.
Note: The ‘iron ready light’ ashes from time to time during ironing
to indicate that steam generator is heating up again.
ENGLISH 13