Operation Manual

1 Press the on/off button for 2 seconds for the light to turn green.
2 To switch back to ‘Optimal Temp’ setting switch off and turn on the
steam generator again.
AUTO OFF/ECO mode
To save energy, the steam generator switches off automatically when it has
not been used for 10 minutes and the auto-off light in the on/off button
starts to ash. To activate the steam generator again, press any button on
the steam generator. The steam generator starts to heat up again.
Cleaning and maintenance
Descaling the steam generator with the EASY DE-CALC knob
To prevent scale build-up inside the steam generator and to ensure long-
lasting steaming performance, this steam generator has a DE-CALC light
on the control panel. This light ashes after about a month or 10 ironing
sessions. When this light ashes, perform the descaling procedure with
the EASY DE-CALC knob by following the steps below.
Never remove the EASY DE-CALC knob when the steam generator is
hot.
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Let the steam generator cool down for 2 hours.
3 Place the steam generator on a stable table top, with the EASY DE-
CALC knob over the edge of the table top.
Tip: You can also take the steam generator to a sink and place it so that the
EASY DE-CALC knob is pointing towards the sink.
4 Hold a cup of at least 350cc under the EASY DE-CALC knob to
collectthewaterthatowsout.
5 Turn the EASY DE-CALC knob anti-clockwise to remove it and let
thewaterwithscaleparticlesowintothecup.
Note: Water starts to ow out of the steam generator as soon as you turn the
EASY DE-CALC knob to remove it.
Note: This steam generator is specially designed to remove scale together with
the water easily and effectively. It is not necessary to shake or tilt the steam
generator.
6 When no more water comes out of the steam generator, reinsert
the EASY DE-CALC knob and turn it clockwise to fasten it.
ENGLISH 11