User Guide
10
Problem Possible cause Solution
The Calc-Clean process
does not start.
You have not pressed the
See chapter ‘Cleaning and maintenance’.
The iron leaves a shine
or an imprint on the
garment.
you were ironing over a seam
or a fold in the garment.
PerfectCare is safe on all garments. The shine
if you wash the garment. Avoid ironing over
seams or folds or you can place a cotton cloth
There was not enough felt in
are water droplets on the
Steam has condensed on the
long ironing session.
or felt material has worn out. You can also
that is not designed to cope
with the high steam rate of
the appliance.
English