User Guide
9
English
Problem Possible cause Solution
The steam function has
performed the Calc-Clean
process.
Perform the Calc-Clean process to restore the
steam function. (see chapter ‘Cleaning and
maintenance’)
The water tank is not placed
in the appliance properly.
At the start of your ironing
enough.
Press and hold the steam trigger until steam
comes out. It may take up to 30 seconds until
steam comes out.
The light of the CALC-
This is the Calc-Clean
reminder.
Perform the Calc-Clean after the Calc-Clean
reminder is given (see chapter ‘Cleaning and
maintenance’).
No steam comes out of
You have not done or have
not completed the Calc-Clean
process.
steam function again (see chapter ‘Cleaning
and maintenance’).
The appliance has
function is activated
automatically when the
up again.
The appliance produces a
loud pumping sound.
The water tank is empty. Fill the water tank with water and press
the steam trigger until the pumping sound
soleplate.
Water droplets come out
of the soleplate.
After the Calc-Clean process
remaining water may drip out
of the soleplate.
Wipe the soleplate dry with a piece of cloth.
Clean process (see chapter ‘Cleaning and
maintenance’).
The Calc-Clean process has
You have to perform the Calc-Clean
process again (see chapter ‘Cleaning and
maintenance’).
Steam condenses into water
in the hose when you use
have not used it for a long
time.
This is normal. Hold the iron away from the
garment and press the steam trigger. Wait
until steam instead of water comes out of the
soleplate.
Dirty water and impurities
come out of the soleplate.
Impurities or chemicals
present in the water have
deposited in the steam vents
and/or soleplate.
Perform the Calc-Clean process regularly (see
chapter ‘Cleaning and maintenance’).
soleplate.
You have accidentally started
the Calc-Clean process
(see chapter ‘Cleaning and
maintenance’).
on again. Let the iron heat up until the ‘iron
ready’ light lights up steadily.