User Guide
8
Caution: The iron is hot.
8
(Fig. 25).
9
start the Calc-Clean process.
accumulated inside the iron. This is normal.
http://www.philips.com/descaling-iron.
Cleaning the soleplate
1 Clean the appliance with a moist cloth.
2
(Fig. 26).
Tip: Clean the soleplate regularly to ensure smooth gliding.
Storage
1
2 (Fig. 27).
3 Fold the water supply hose. Wind the water supply hose inside the water supply hose storage
(Fig. 28).
4 Fold the mains cord and fasten it with the Velcro strip (Fig. 29).
5 (Fig. 30).
6
platform 31).
Troubleshooting
www.philips.com/support for a list of
Problem Possible cause Solution
The iron does not produce
any steam.
There is not enough water in the
indication. Press and hold the steam trigger
seconds until steam comes out.
You did not press the steam
trigger.
Press and hold the steam trigger until
steam comes out.
The steam function has
been disabled until you have
performed the Calc-Clean
process.
Perform the Calc-Clean process to restore
the steam function. (see chapter ‘Cleaning
and maintenance’)
the appliance properly.
At the start of your ironing
not been pressed long enough.
Press and hold the steam trigger until
seconds until steam comes out.
The light of the CALC-
the appliance beeps.
This is the Calc-Clean reminder. Perform the Calc-Clean after the Calc-Clean
reminder is given (see chapter ‘Cleaning
and maintenance’).
English