User Guide
Table Of Contents
10
Problem Possible cause Solution
appliance enters the standy
minutes.
loud pumping sound.
the steam trigger until the pumping
Water droplets come out
the soleplate.
Calc-Clean process (see chapter ‘Cleaning
and maintenance’).
process again (see chapter ‘Cleaning and
maintenance’).
Steam condenses into water in
the garment and press the steam trigger.
Dirty water and impurities
Impurities or chemicals present in
the water have deposited in the
steam vents and/or soleplate.
regularly (see chapter ‘Cleaning and
maintenance’).
Steam condenses into water in
the garment and press the steam trigger.
soleplate.
You have accidentally started the
Calc-Clean process (see chapter
'Cleaning and maintenance').
the ‘iron ready’ light lights up steadily.
does not start.
You have not pressed the CALC-
See chapter ‘Cleaning and maintenance’.
are water droplets on the
Steam has condensed on the
ironing session.
is not designed to cope with the
English