Quick Start Guide Readme File

1
Perform descaling once the
descaling light ashes and the
appliance beeps.
The steam function will be
disabled automatically if
descaling is not performed.
4. Performing descaling
Fill the water tank halfway and
switch on the appliance.
Turn the temperature dial
to ‘
CALC CLEAN
’.
Place the iron on the Calc-Clean
container on an even, stable surface.
Press and hold the ‘
CALC CLEAN
’
button for
2 seconds
until you
hear short beeps.
Wait approximately
2 minutes
.
You will hear short beeps.
When t
he descaling process is
completed
, the iron stops beeping.
Press
2 sec
2 min
• Do not leave the appliance unattended during the descaling process.
• Hot water and steam will come out of the soleplate.
• Do not interrupt the descaling process (approx. 2 minutes).
With the
Calc-Clean container
provided, you can perform
descaling easily and
get clean steam.
3. Sound and light descaling reminder
With the new Smart Calc-Clean feature, you’ll be reminded to descale your appliance when this is needed.
Calc-Clean
Container
4239.001.0031.1
Steam function
disabled
GC6600_SpeedCare_4239.001.0031.1_cHR.pdf 2 22-09-15 11:54