User Guide

23
Problem Possible cause Solution
Board is
shaky during
use.
The poles are not
installed properly
or the board is not
secured onto the
poles.
Refer to for correct
installation.
The board lock is
not fully inserted.
Insert the two board
locks fully until you
hear a
“click”
sound
(
refer to ).
The board is not
fully secure in
vertical position.
Make sure that the
board tilting lever is in
a locked position
before attaching it to
the poles ( refer to
).
Board cannot
be tilted or be
used in
horizontal
position.
The board lock is
not locked onto the
pole.
Ensure that the board
lock is in a locked
position ( refer to ).
The board tilting
lever has not been
released.
Ensure unlocking
tilting lever to allow
board to be tilted to its
desired position.
Once a desired
position is attained,
lock the tilting lever to
secure board..
( refer to / )