User Guide

22
Problem Possible cause Solution
Water leaks
out from the
steamer base.
The water tank is
not inserted
properly.
Insert the tank
properly.
Water tank has
been overfilled.
Fill water up to its
MAX
marking.
Steam lock
cannot be
activated.
Fail to enter steam
lock function.
Double tap to activate
the steam lock
function ( refer to ).
Steam does
not stop
automatically
after placing
the steamer
head onto the
holder.
Steam lock function
is activated.
Press once to
deactivate steam lock
( refer to ).
The board
cover
becomes
wet or there
are water
droplets on
the garment
during
steaming.
Steam has
condensed on the
board cover after
a long steaming
session.
Leave it to dry before
storage. Replace the
board cover if it has
worn out. Purchase a
new board cover from
a Philips Authorized
Service Center.