User Guide

27
Problem Possible cause Solution
Water droplets
drip from the
steamer head,
sometimes the
appliance
produces a
croaking sound.
Steam condenses
into water in the


Lift the steamer head to straighten
the hose vertically.
At the start of a steaming session,
set the steam setting to be in MAX
mode. Hold the steamer head away
from the garment and press the
steam trigger for 10 seconds to
release the initial gush of water
droplets.
Dirty water,
brown stains or

come out of the
steamer head
and stain the
garment.
Chemical or
additives is added
into the water tank.
Never use chemical or additives with
the appliance. Fill the water tank with
water and allow it to steam out 1 full


stains under running water.
For stain on steamer head, wipe

with a damp cloth.
Depending on
where you stay, the
water hardness
level may be high
and results in fast
scale builds up.
Ensure that water tank is emptied
after a steaming session. It is
recommended to use a
combination of demineralization/


At the start of a steaming session,
set the steam setting to be in MAX
mode. Hold the steamer head away
from the garment and press the
steam trigger for 10 seconds to
release the initial gush of water
droplets.

stains under running water.
For stain on steamer head, wipe

with a damp cloth.