operation manual

◗ If steam escapes from under the steam tank cap when the

appliance is heating up, switch the appliance off and tighten the

steam tank cap. If steam continues to escape when the appliance is

heating up, switch the appliance off and contact a service centre

authorised by Philips.

◗ Do not remove the cap from the steam tank when the steam tank

is still hot. Follow the instructions under 'Fast refill' when

removing the cap.

◗ Do not use any other cap on the steam tank than the cap that has

been supplied with the appliance, as this cap also functions as a

safety valve.

◗ Always place the steam tank on a stable, level and horizontal

surface. Do not put the steam tank on the soft part of the ironing

board.

◗ When you have finished ironing and even when you leave the iron

for a short while, unplug the appliance and put the iron on the

iron stand.

◗ This appliance is intended for household use only.

Before first use

1 Remove any sticker or protective foil from the soleplate and

clean the soleplate with a soft cloth.

2 Fully unwind the mains cord and supply hose.

3 Place the steam tank on a stable, level surface.

4 Place the iron on the iron stand.

Preparing for use

Filling the steam tank

Never immerse the steam tank in water.

Do not open the cap when the iron and the steam tank are still hot.

1 Remove the mains plug from the wall socket.

2 Slowly unscrew the cap of the steam tank.

You may hear a sound when you remove the cap.This sound is caused

by the vacuum or residual pressure inside the steam tank and is

perfectly normal.

ENGLISH 7